Rupture Discs

Rupture discs are pressure relief devices that are designed to burst at a set pressure in order to release excess pressure in a given system.

(Courtesy of Continental Disc Corporation | Groth Corporation | LaMOT Brand Products.)

General Information

Rupture discs prevent pressure from building to a dangerously high level by bursting to relieve system pressure. The disc will burst at a set change in pressure across the disc. A rupture disc can also protect against suction when vacuum conditions are present. The disc can be calibrated to burst if a specific differential suction pressure is present, preventing suction damage on equipment.

Equipment Design

Rupture discs consist of a disc and a holder. The holder clamps the disc by its circumference and connects the disc to the system piping. The disc is the pressure sensitive portion, and is more commonly made out of metal, but can be made out of graphite, tension-loaded materials, or composites depending on the pressure at which it is designed to rupture. The rupture pressure is entirely dependent on the material of the disc. Often rupture discs are custom ordered, with a coating to protect them from corrosion due to the particular set of chemicals that they are in contact with during operation. Common coating materials include lead and polyvinylchloride.

(Courtesy of Continental Disc Corporation | Groth Corporation | LaMOT Brand Products.)

Discs are dome shaped, which gives rise to two types of rupture discs based on the dome orientation in the system. A rupture disc is forward-acting if the metal is domed in the direction of the fluid pressure. A rupture disc is reverse-acting if the metal is domed in the opposite direction of the fluid pressure. Forward-domed discs burst because of tensile forces. Reverse-domed, or reverse-buckling, discs burst because of compression forces.

As pressure is increased near a forward-domed disc, the dome starts to expand. If pressure continues to increase the metal will continue to expand causing a thinning of material in the center of the dome. Eventually the tensile force becomes too great and the disc bursts. The burst originates in the center of the dome.

As pressure is continuously increased near a reverse-buckling disc, the dome expands where the disc connects to the holder. The disc eventually bursts along the connection between the holder and the dome. Reverse-buckling discs have a lower rupture pressure than forward-domed discs, however their performance is less sensitive to temperature.

Discs performance may be enhanced by supports and cuts. Vacuum supports may be installed to help prevent collapse under vacuum pressure. A disc may be pierced and cut, or scored, to reduce the rupture pressure.

(Courtesy of Continental Disc Corporation | Groth Corporation | LaMOT Brand Products.)

Usage Examples

The main function of a rupture disc is for safety considerations. Rupture discs often use two discs for every one holder. This is done to prevent leaking, especially if the fluid is corrosive. Another common use of rupture discs is in conjunction with pressure relief valves. The advantages for utilizing both PRVs and rupture discs together are to insure system safety under a broader range of possible failures. Advantages for combined use of PRVs and rupture discs are outlined below.

Advantages

Disadvantages

  • May be used when solids are suspended in the system fluid.
  • Performs well at low temperatures.
  • Performs well with viscous fluids.
  • Often used along with PRVs for added protection.
  • If used with a PRV, the rupture disc will prevent fluid leakage through the PRV, prevent deposits from hindering PRV performance, and reduce the cost of maintaining a PRV.
  • Reverse-buckling discs are less dependent on temperature and are therefore better for high temperature systems.
  • Disc performance is greatly affected by temperature because temperature effects disc material brittleness.
  • A burst rupture disc cannot be resealed.

Acknowledgements

Continental Disc Corporation

References

Crowl, Daniel A., Louvar, Joseph F. Chemical Process Safety: Fundamentals with Applications &nbspNew Jersey: Prentice Hall P T R, 1990. Print.

Doyle III, Francis J., Edgar, Thomas F., Mellichamp, Duncan A., and Seborg, Dale E. Process     &nbspDynamics and Control . 3rd ed. New York: John Wiley & Sons, 2011. Print.

Guidelines for Pressure Relief and Effluent Handling Systems . New York, NY: Institute, 1998.     &nbspWeb.

Mukherjee, Siddhartha. Pressure-Relief System Design . Chemical Engineering, November     &nbsp2008: 40 - 45.

Developers

Eric Giuffrida

Michael Andrews